| 陶瓷注射成型粘结剂须具备哪些条件 |
| 添加时间：2019/11/9 15:00:47 浏览次数： |
| 陶瓷注射成型粘结剂须具备以下条件： Ceramic injection molding binder shall meet the following conditions: (1)流动特性好，注射成型黏度适中，且黏度随温度不能波动太大，以减少缺陷产生； (1) good flow characteristics, moderate viscosity of injection molding, and viscosity can not fluctuate too much with temperature to reduce defects; (2)对粉体的润湿性和粘附作用好； (2) good wettability and adhesion to the powder; (3)具有高导热性和低热膨胀系数。 (3) it has high thermal conductivity and low thermal expansion coefficient. (4)一般由多组分有机物组成，单一有机粘结剂很难满足流动性要求。 (4) it is generally composed of multi-component organics, and single organic binder is difficult to meet the fluidity requirements. |
| 上一页 氮化铝陶瓷的流延成型 |
| 下一页 铝粉直接氮化法 |
Copyright © 技术支持：遨游网络